Motor Cruiser Escapade 35
Category B Navigation
- Boat REF# · 325450
- LOA · 12.00m
- Year · 2009
- Construction · Other
- Underwater profile · semi-displacement
- Berths · 4
- Engine · 2 x Diesel 125hp, Yanmar Turbo intercooler (2009)
- Lying · Midi canals
This boat is off the market but here are some boats that are still For Sale
Extra Details
| Designer | Jean-Pierre Tutard |
|---|---|
| Builder | Amateur |
| Lying | Midi canals |
| Fuel capacity | 450.0 ltr Total - 2 Tanks |
| Water capacity | 650.0 ltr Total - 1 Tanks |
| Holding tank capacity | 50.0 ltr Total - 2 Tanks |
| Last survey | 09/08/2023 |
Mechanical
| Engine | 2 x Diesel 125hp |
|---|---|
| Engine make and model | Yanmar Turbo intercooler (2009) |
| Engine Hours |
engine1= 614 engine2= 610 |
| Engine Cooled | Indirect |
| Steering | Wheel |
| Drive | Shaft |
| Prop(s) | 4 blade bronze |
| Fuel consumption (approx) | 10.0 ltr /hour At Cruising Speed |
| Cruising speed (approx) | 10 knots |
| Max speed (approx) | 15 knots |
Mechanics:
As you can see, the engines appear to be very well-maintained, easily accessible in soundproofed compartments to minimize their noise. Power is not lacking with 125hp per engine while maintaining a reasonable consumption of 5L/H per engine at 10 knots, according to our owner's statements.
The steering is ensured by a hydraulic system.
There are also two Volvo water seal glands installed on the two 35mm propeller shafts.
Electrical:
We have 4 batteries of 100Ah, one dedicated to each engine and two for the service. They are recharged by the 80W solar panel, the engine, and the shore power connection.
Dimensions
| LOA | 12.00m |
|---|---|
| LOD | 10.50m |
| Beam | 3.10m |
| Draft Min | 0.80m |
| Airdraft | 2.50m |
| Displacement | 5,000kg |
| Headroom | 1.74m |
| Storage | Dry storage |
Electrical Systems
12 volt battery, 240 shore power voltage, 4 batteries charged by: engine, solar panels, shore power
Construction
| Construction | Other |
|---|---|
| Underwater profile | semi-displacement |
| Finish | 2 pack finish |
The hull is constructed using epoxy-laminated plywood (original thickness of 28 mm). The hull is also coated with epoxy, with a final layer of antifouling.
All the tanks are Vetus brand. There are two diesel tanks of 225L each (totaling 450L).
There's a freshwater tank of 650L.
A greywater tank of 35L and a blackwater tank of 50L.
Accommodation
| Total # of berths | 4 |
|---|---|
| No. of double berths | 2 |
| Cabin(s) | 1 |
| Handbasin | 2 |
| Shower | 1 |
| Heads | 1 heads (Manual) |
You enter the boat through a spacious terrace where you can sit sheltered from the sun under the bimini that can cover the entire terrace laterally. The height under this bimini is 1.73m. The wide swim platform and the rear swim ladder allow you to swim anywhere and get back on board easily.
Next, you enter the saloon-galley area, with a headroom of 1.90m at its highest point.
This boat is practically a Sedan, with only one step between the saloon and the cabin. Storage spaces are not lacking, as you can see in the photos and videos. A hot water tank provides onboard hot water. There are hatches everywhere providing access to the boat's bilge and its equipment, making maintenance easier.
The cabin bed is spacious, measuring 76cm at the foot and 1.96m wide at the head, with a length of 196cm. This allows you to sleep widthwise and avoid rolling when the sea is rough. There's a headroom of 1.22m under the bed. The sink tap extends to allow you to take a shower in the toilet area.
Accommodation
| Oven | |
|---|---|
| Refrigerator | |
| Pressurised water system | |
| Hot water system | |
| Cockpit shower |
You enter the boat through a spacious terrace where you can sit sheltered from the sun under the bimini that can cover the entire terrace laterally. The height under this bimini is 1.73m. The wide swim platform and the rear swim ladder allow you to swim anywhere and get back on board easily.
Next, you enter the saloon-galley area, with a headroom of 1.90m at its highest point.
This boat is practically a Sedan, with only one step between the saloon and the cabin. Storage spaces are not lacking, as you can see in the photos and videos. A hot water tank provides onboard hot water. There are hatches everywhere providing access to the boat's bilge and its equipment, making maintenance easier.
The cabin bed is spacious, measuring 76cm at the foot and 1.96m wide at the head, with a length of 196cm. This allows you to sleep widthwise and avoid rolling when the sea is rough. There's a headroom of 1.22m under the bed. The sink tap extends to allow you to take a shower in the toilet area.
Deck Gear
| Sun awning | |
|---|---|
| Warps | |
| Fenders | |
| Boathook | |
| Swim Platform | |
| Swim Ladder | |
| Cockpit Enclosure | |
| Bimini |
Electric Gain d'eau 100W windlass
1 anchors
50.00m of chain
dinghy ()
Nav Equipment
| Compass | |
|---|---|
| Speed | |
| Radar | |
| VHF | |
| GPS | |
| Autopilot | |
| Stereo | |
| Navigation lights | |
| Fish Finder | |
| Echo sounder |
This boat is well-equipped with navigation equipment from renowned brands.
Safety Equipment
2 bilge pumps (1 manual / 1 Electric)
Broker's Comments
Boatshed Midi Canals is pleased to present to you this almost 40ft Sedan type twin engined Motor Cruiser for sale.
Escapade 35 for sale in the south of France.
Here we have a boat designed for sea cruising (Cat.B) but also well-suited for canals due to its low draft and air draught . Our owner's goal in building this boat was to achieve the same fuel efficiency as a sailboat while traveling at twice the speed. Our owner assures us that at 10 knots, this boat only consumes 5 litres per hour per engine.
Our owner is no stranger to boat building as this is actually the second boat he has constructed. It's rare to find bilges as clean as these; one can sense the meticulous care our owner (an aeronautical engineer) has put into the construction and maintenance of his boat. Some professionals couldn't have done better.
With passages to Sicily and Corsica already under her keel, this Escapade 35 has proved to be a comfortable and economical coastal cruiser that will allow you to fulfil all your travel plans on Europe's coasts and inland waterways.
She is currently dry-stored in a hangar near the Canal du Midi.
For further information or to arrange visits, please contact Robin de Frayssinet, your Boatshed Midi Canals broker.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Owners FAQ's
How long have you owned the boat for?
2009
Why are you selling her?
Health issues
Where have you sailed her?
Mediterranean sea (Lyon Golf, Italy, sicily, Corsica)
Comments 0
Please note this comments section is public. Please do not post your personal details here. To enquire about purchasing this boat, please contact the broker directly at robindefrayssinet@boatshedmidicanals.com Please read our commenting guidelines before posting.
Login or register for free