Tony Tucker Custom Cutter
- Boat REF# · 211331
- Length · 12.40m
- Year · 1998
- Construction · Aluminium
- Underwater profile · Bilge
- Sleeping berths · 7
- Engine · 1 x diesel 75hp, perkins 4236 (1997)
- Lying · larnaca
This boat is off the market but here are some boats that are still For Sale
Extra Details
| Designer | Tony Tucker / Tim Drury |
|---|---|
| Lying | larnaca |
| Fuel capacity | 410.0 ltr Total - 3 Tanks |
| Water capacity | 1,000.0 ltr Total - 1 Tanks |
| Holding tank capacity | 1,000.0 ltr Total - 1 Tanks |
Mechanical
| Engine | 1 x diesel 75hp |
|---|---|
| Engine make and model | perkins 4236 (1997) |
| Engine Hours |
engine1= 940 |
| Engine Cooled | Indirect |
| Steering | wheel |
| Drive | shaft |
| Prop(s) | 3 blade Bronze |
| Fuel consumption (approx) | 8.0 ltr /hour At Cruising Speed |
| Cruising speed (approx) | 6 knots |
| Max speed (approx) | 12 knots |
| Generator output | 5KVA |
| Engine spares |
|---|
Dimensions
| Length | 12.40m |
|---|---|
| Beam | 4.20m |
| Draft Min | 2.00m |
| Airdraft | 17.07m |
| Displacement | 12,000kg |
| Headroom | 1.88m |
| Storage | On marina |
Rig
Cutter rigged Sailspar Aluminium spars (1998) with Stainless Steel standing rigging (1998)
Sails
| Reefing mainsail | Fleetwood sail - (1998) Fully Battened, Lazy Jacks, |
|---|---|
| Headsail | Fleetwood - Furling (1998) |
| Other sails | fore staysail (1998) |
| Spinnaker (1998) | |
| Spinnaker (1998) |
| Spinnaker gear |
|---|
mainsail in need of new stitching due to UV damage
Electrical Systems
12 volt battery, 4 batteries charged by: engine, shore power, generator
Construction
| Construction | Aluminium |
|---|---|
| Underwater profile | Bilge |
| Finish | 2 pack finish |
Accommodation
| Total # of berths | 7 |
|---|---|
| No. of double berths | 3 |
| No. of single berths | 1 |
| Cabin(s) | 3 |
| Sink | 2 |
| Shower | 2 |
| Air conditioning | 1 Air conditioning Units |
4 burner propane Stove
Accommodation
| Stove | |
|---|---|
| Broiler | |
| Oven | |
| Sink | |
| Refrigerator | |
| Carpet | |
| Air conditioning | |
| Cabin heating | |
| Pressurised water system | |
| Hot water system | |
| Microwave |
4 burner propane Stove
Deck Gear
| Sail cover | |
|---|---|
| Bimini | |
| Rode | |
| Fenders | |
| Boathook | |
| Davits | |
| Instrument Covers |
2 halyard winches
3 sheet winches
Electric Lofrans windlass (with remote control)
7 anchors
(various)
20.00m of chain
60.00m of rode
dinghy (1998)
(Inflatable)
0hp outboard, yamaha, Short shaft ()
Nav Equipment
| Compass | |
|---|---|
| Speed | |
| Log | |
| Wind | |
| Radar | |
| VHF | |
| GPS | |
| Chart plotter | |
| Autopilot | |
| Stereo | |
| Clock | |
| Barometer | |
| Navigation lights | |
| TV | |
| Depth sounder | |
| Radar Reflector |
Safety Equipment
| Fume detector | |
|---|---|
| Gasolene Detector | |
| Liferaft | |
| Life jackets | |
| Life buoys | |
| Searchlight | |
| Safety harnesses | |
| Horn | |
| Swim ladder | |
| Emergency steering |
5 bilge pumps (1 manual / 4 electric)
Broker's Comments
This is a Tony Tucker/Tim Drury designed Aluminium hull cutter that is built for open water cruising.
She has a nice wide beam and comfortable saloon and cockpit. The owners cabin has en-suite facilities and there is another heads in the Saloon complete with shower unit.
Whilst she is in need of some updating and TLC she has been priced to sell .
Now reduced further due to change in personal circumstances.