Albatross Sport Mk 111
- Boat REF# · 306445
- LOA · 3.90m
- Year · 1958
- Construction · Aluminium
- Underwater profile · Planing
- Engine · 1 x petrol 43hp, Marinised 1300cc Ford Crossflow (1971)
- Lying · Poringland, Norfolk
This boat is off the market but here are some boats that are still For Sale
Extra Details
Designer | Archie Pearce and Peter Hives |
---|---|
Builder | Albatross Marine, St Olaves |
Lying | Poringland, Norfolk |
Fuel capacity | 15.0 ltr Total - 1 Tanks |
Mechanical
Engine | 1 x petrol 43hp |
---|---|
Engine make and model | Marinised 1300cc Ford Crossflow (1971) |
Engine Hours | Not Recorded |
Engine Cooled | Indirect |
Steering | Wheel |
Drive | Shaft |
Prop(s) | 3 Blade Bronze |
Fuel consumption (approx) | Not Recorded |
Cruising speed (approx) | 25 knots |
Max speed (approx) | 32 knots |
The engine supllied is not correct for this boat. She would have been fitted with a Ford 100E engine with the drive coming directly from the front crankshaft pulley.
There were no gearboxes fitted so it was a case of turn the key and off you go!
This engine is ideal for a Freeman 22/23 or 24 as this was oringinal choice of engine for Freeman models.
Engine can be shown running as in video.
The ideal engine (other than the 100E original fitment) is a Beta 14 2 cyl diesel which will fit in the engine bay without having to cut out the bulkhead.
This engine also alows the gearbox supplied thith the Beta 14 to be fitted giving fwd, reverse and nuetral.
Dimensions
LOA | 3.90m |
---|---|
LOD | 3.90m |
LWL | 3.66m |
Beam | 1.46m |
Draft Min | 0.40m |
Draft Max | 0.40m |
Storage | Dry storage |
Electrical Systems
12 volt battery,
Construction
Construction | Aluminium |
---|---|
Underwater profile | Planing |
Finish | Aluminium finish |
Deck Gear
Trailer |
---|
Broker's Comments
A superb little project boat built in 1958 from aircraft grade aluminium and flush riveted construction.
Everything is included to finish the project and there is a good trailer and engine included. (Though not the correct engine as originally fitted).
There is an extensive owners club and almost all parts are available from Albatross Marine who are still trading.
There is a fascinating history about these boats to be found detailing the succes they have in races which even today take place on Oulton Broad.
Undoubtedly a peice of British history with many famous owners.
i see this as an exiting low cost "project" which is easily stored and would make a very rewarding build.
Ideally a Ford 100E engine would be fitted to enhance value or it icould be the perfect base to power by electric without having to "chop around" the original structure.
Alternatively a the ideal engine (other than the 100E original fitment) is a Beta 14, 2 cyl diesel which will fit in the engine bay without having to cut out the bulkhead.
This engine also alows the gearbox supplied thith the Beta 14 to be fitted giving fwd, reverse and nuetral.
These boat details are subject to contract.
Owners FAQ's
How long have you owned the boat for?
2 years
Why are you selling her?
No time to finish
Where have you sailed her?
Not used